A quick bit of thank to Earl Hamil who suggested I make the legs taller on the table to get them to a 48 inch height. After looking at the design, I opted to go from 34 to 44. The reason for not going all the way to 48 is that I intend to have the track on a 4 inch riser system, made predominantly from foam. I’ll try that out first, and if I don’t find that feasible, I can always go up to 48 at another time – I just have to recut the legs. Here then, is the revised design, with the 3×6 tables next to the smaller 2.5×6 tables, so the entire table set is now visible.
