So as I was falling asleep last night, it occurred to me that even though my tables won’t be a full 4 foot across, at 8 foot long they might be a bit hard to get in / out of the basement. so in the interest of saving myself a bit of frustration, I’ve modified my design just slightly so that rather than two 3 x 8 tables, I am essentially going to build 4 tables that are 3 x 4, with each paired and using a single leg set. This way I still have two 3 x 8 tables arranged in an L shape, but when we eventually buy a home, I should have less of an issue getting the tables out of the current place and into whatever space I have in the future. The only change in material requirements are the purchase of 1 more 1″ x 3″ x 6′ and a set of 4 bolts to hold the table segments together. There will probably also be some sort of wood plate under the adjoining sections for alignment purposes, but I’ll figure that out as I go. I’m not going to bother updating any of the photos on here for now, but down the line I might post the finalized images.